9.3mm Bullets: Anyone have any?

[35 Whelen]

My Pop recently bought a CZ bolt rifle in 9.3x62mm. He had it out here at the house Saturday breaking in the barrel and it seemed to copper foul something fierce. We got the copper out, but it was a bit of a chore. I'm guessing the bore could use a good lapping.
I don't cast for this caliber and likely never will. Does anyone have a few cast bullets they could part with for this fire-lapping project? Even rejects would be fine. I suppose they'd need to be sized, but not necessarily lubed as I'll be pushing them very slow.
I'd be willing to pay for them or trade a few of my own bullets. I cast .30, .357, .45ACP and some 45-70.
Thanks in advance!
35W

[elk hunter]

35 Whelen,

If you don't do any good here you might try the "Accurate Reloading" site, there are a lot of 9.3 shooters that hang out there.

Your pop is going to love his 9.3x62 it's a metric 35 Whelen as I'm sure you're aware.

[Old Ironsights]

I have a 9.3 mould for my 9.3x72 R... Tets talk PM...

[Bullshop]

The Bullshop has two boolit designs in that caliber, one gas check and one plaine base.
You can also PP 35 cal designs.
BIC/BS