Rcbs 30-150-sp

[Wolfdog91]

Have had this mold practically new in the box for a year now and finally got around to getting a pair of handles for it, sexy lil boolit
Think my 30-30 will be getting some of these
https://uploads.tapatalk-cdn.com/20240918/5f85186a7177386ca125975f81a7092b.jpghttps://uploads.tapatalk-cdn.com/20240918/c6ab24cf1b24487515ddaa4a8286d3b8.jpghttps://uploads.tapatalk-cdn.com/20240918/f8c4a1e2778c211dff174f6309f456e7.jpg

Sent from my motorola edge 5G UW (2021) using Tapatalk

[gwpercle]

Have had this mold practically new in the box for a year now and finally got around to getting a pair of handles for it, sexy lil boolit
Think my 30-30 will be getting some of these
https://uploads.tapatalk-cdn.com/20240918/5f85186a7177386ca125975f81a7092b.jpghttps://uploads.tapatalk-cdn.com/20240918/c6ab24cf1b24487515ddaa4a8286d3b8.jpghttps://uploads.tapatalk-cdn.com/20240918/f8c4a1e2778c211dff174f6309f456e7.jpg

Sent from my motorola edge 5G UW (2021) using Tapatalk

:goodpost:
LIKE LIKE LIKE !!!

[TNsailorman]

Good looking bullet, looking forward to seeing a test of some of them. james

[Winger Ed.]

The 150s & 170s were pretty much designed for the .30-30, and have proven out very well.

[Bazoo]

It is a nice looking bullet. RCBS moulds cast beautifully. I wasn't familiar with it, thanks.

[wmitty]

Wolfdog, that’s a good looking design, for sure. Have you measured the diameter of the nose portion above the crimp groove?

[Wolfdog91]

Wolfdog, that’s a good looking design, for sure. Have you measured the diameter of the nose portion above the crimp groove?

I haven't but I can in a bit