NOE mold for 45-70

[Iron369]

Anyone have experience with this particular product? I’ve never cast for 45-70, but do for other calibers. I’m also haven’t cast anything that big so I’m open for advice. NOE is running sale and looking to buy a mold this weekend. I’m open to other recommendations though. Thanks. https://uploads.tapatalk-cdn.com/20240525/3e9c7f56e989edee5b4a3a980953184a.png

[725]

Really depends on what you want to shoot at. Punching paper up close, too much lead to waste. Punching paper far away and that weight will serve you well. Hunting at any reasonable distance and it's too much weight. Not that it won't work - it sure will, but that's a lot of lead to keep putting down range. I primarily hunt so my boolits are generally in the 350 to 400 grain weight. Not saying it's a bad choice, because it's not. Depends on what your desires are. Good luck.

[Iron369]

Really depends on what you want to shoot at. Punching paper up close, too much lead to waste. Punching paper far away and that weight will serve you well. Hunting at any reasonable distance and it's too much weight. Not that it won't work - it sure will, but that's a lot of lead to keep putting down range. I primarily hunt so my boolits are generally in the 350 to 400 grain weight. Not saying it's a bad choice, because it's not. Depends on what your desires are. Good luck.

Wasting lead isn’t an issue. I’ve got way more lead than I will ever use. Primers and powder… that’s a different story but those will be used regardless of the projectile weight.
I didn’t see any 400gr molds on noe’s website and that’s really what I was looking for.

[Chill Wills]

This is a powder coat bullet and I assume that is how you intend to use it.
As far as advising you on design and weight, your goals for its use are not clear. As said above, for just making holes in paper, it is a lot of bullet. Rifle and twist would be interesting in the discussion too.

I have 45-70 bullet molds from 330 grain to 580grains, all for different types of need.

(our posts crossed) 400grns is a good all round weight.

[rmark]

I use the NOE 460-378 GC, similar to the currently cataloged 460-393 GC, which casts at about 400 grains with my bhn9 range lead. I’ve been happy with it but only shoot low power loads out to 150 yards, can’t see the target with open sights past that.

[gwpercle]

NOE Moulds can get habit forming very quickly ...
They are well made , works of art and sweet casting moulds ...
I got addicted after buying my first one ... a 4 cavity 358-124-TC GC ...aluminum .
I use that one boolit to load 38 Special , 357 Magnum , 9mm Luger and 38 Super .
Al has some very good designs and a lot of discontinued Lyman designs .
Try one ... but be careful ... they is habit forming !
Gary

[Holdmonkey]

In my opinion, and it's just MY opinion, a 405 grain, hard cast, flat point lead bullet with an appropriate charge behind it out of a .45-70 Government rifle is about all you need for life's everyday situations. Granted, special needs require special solutions, i.e.the 500 grain. But do the special situations come along often enough to justify that much lead being tied up in however many of those loads?

[JMN]

I cast the traditional 450gr minnie ball for my 50-70 Govt rifle. It's what the rifle was designed for and it works well. There's nothing special about casting a large bullet but, yes it does use up a lot of lead. I use a Lee mold and it works. Order the NOE for that extra level of quality.