Stripper Clip Adaptor

[Rich005]

Looking for a stripper clip adaptor to fit a Rem.700 SA in 223 ?

[akajun]

most people take a one piece scope base and have the slot cut into it.

[country gent]

They used to be available from several shops Champions choice, ok webers, champion shooters supply. To make one isnt hard but the scope rail needs to over hang the action some where the slot is cut. sinclairs may also have them. a length of the rail blank from brownells would work. You might check with brownells and midway usa also

[Rich005]

Thanks for the replies gentlemen.

[country gent]

If making one be sure that there are no sharp edges on it. It will peel skin fast as your thumb slides over it. [smilie=1:

[M-Tecs]

Chad Dixon of Long Rifles Inc still cuts the receives for them and he may do bolt on guides also. https://www.longriflesinc.com/?fbclid=IwZXh0bgNhZW0CMTAAAR0BIVMGh7xnh8F9BABP4W0J ZDTZsvldPyPN7rc8NvQYGeao1DRAkVE8PIQ_aem_AcpYfR2_SI j8l_jJhWT-HTuErzgLc25q2VQCZ4NHvpoSt0SFQSzlR79tM9_zpWRL5TF-13h2OHc3ElGMY1VT2JX4