View Full Version : New 3D project
This one isn't gun related, but still a handy little stand for the TinySA Spectrum Analyzer I got a couple weeks ago. The black strands on bottom are where I didn't get the last black filament cleaned out good before printing. It's printed with PTEG which seems to work pretty good. I printed in "rough draft" mode so the text doesn't show up as good as it should.
https://i.ibb.co/x2FQt1H/Tiny-SA-Stand.jpg
MSUICEMAN
03-28-2024, 11:41 AM
Exactly the type of thing I was going to design for an endoscope display I have. Nice.
Sent from my Pixel 5 using Tapatalk
jdgabbard
03-28-2024, 11:57 AM
Very nice. I don't have a spectrum analyzer, nor a need for one. But for the smaller tools like the pocket oscilloscopes and data loggers something like this could be nice. Personally, I don't have any pocket size equipment, all my is bench size. But I got a buddy in avionics that might can use something like this for mounting when he isn't crawling around in airplanes changing out nav systems.
Thanks for the share!
-Doug.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.