View Full Version : Asking for some help here ...
Fuzzy1
03-09-2024, 04:51 PM
Would any one here be able to tell me what the length of a Winchester Model 70 firing pin would be ???
It is a 1964 model ... long action ... push feed ... and it has the castle shaped spring retainer that locks onto the firing pin with a quarter twist.
Thanx for reading ... ...
Bøb ...
indian joe
03-10-2024, 07:30 AM
Would any one here be able to tell me what the length of a Winchester Model 70 firing pin would be ???
It is a 1964 model ... long action ... push feed ... and it has the castle shaped spring retainer that locks onto the firing pin with a quarter twist.
Thanx for reading ... ...
Bøb ...
try Winchester Bob ? he was selling replacement firing pins a couple years ago - I was told they fit a Browning 71 also
Fuzzy1
03-10-2024, 05:50 PM
Don't see him selling ANY Model 70 parts. Thanx for the info.
John Taylor
03-11-2024, 09:42 AM
The protrusion should be .050" to .060".
Fuzzy1
03-11-2024, 01:21 PM
That is not my problem, but thank you so much for taking the time to answer.
Hi, Hope this helps.
https://i.postimg.cc/zGRQWVdZ/20240311-142518.jpg (https://postimg.cc/xXngVTDt)
https://i.postimg.cc/C1djpRrr/20240311-142543.jpg (https://postimg.cc/MM2cypS1)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.