PDA

View Full Version : crafting a SIG SAUER P232 SLIDE STOP SPRING



rintinglen
02-27-2024, 06:09 PM
Last night while disassembling my P232 to clean it, the afore mentioned spring launched into lord only knows where. A search for a replacement has been as ineffectual as my search for the original. So, I am going to have to make a small spring to replace it. Currently, I have a spring made from a paper clip which is working, but I will have to make and temper a replacement.

Any advice on tempering the wire? What kind of wire should I use? I know I'll need a piece ~.025-.035 in diameter. I am toying with using a piece of guitar string, but I'll do what I have to do.

rintinglen
03-09-2024, 11:37 AM
Actually. I already knew what I had to do, all I had to do was get my 70 year old brain to remember it. For small gauge spring wire, do yourself a favor and order
https://www.amazon.com/BBYPP-Straight-Steeless-Assortment-Different. 156 pieces of spring wire, ranging from .2 MM to 3 mm. Select the appropriate size and start bending. There is no sense re-inventing the wheel. Making your own spring wire and tempering metal is best left to those who must do so.

I used a piece of .6 MM about 1 1/2 inches long, a drill bit that just fit in the recess where the spring goes, pliers and a small hobby vise. My vice has a small recess in the face of each jaw for holding small, round items I placed the wire so that it straddled the jaws, which were set just enough to allow me to push the drill bit down against the wire between the jaws. This formed a "u"-shaped bend that approximated the diameter of the recess on the frame. Some deft work with a pair of needle nose pliers and a pair of dykes soon had me holding a spring that fit in the recess and closely approximated my previous paperclip, only much more "springy."

I put it in the gun, cycled a few dummy rounds to make sure it worked, and called it good.

deltaenterprizes
03-09-2024, 02:30 PM
Thanks for the info about the spring wire assortment!
The link doesn’t work!

M-Tecs
03-09-2024, 04:00 PM
Try here https://www.matrixprecisionparts.com/product-category/sig-sauer/p232/

straight spring wire assortment here
https://www.amazon.com/gp/product/B09DKG7MNB/