View Full Version : Shortest 300 BLK AR magazine?
Recycled bullet
02-20-2024, 07:11 PM
I am wondering about shorter length 300 Blackout specific magazines. I am shooting 225 grain powder coated lead bullets through a Ruger American Ranch Rifle. My rifle has the magazine well to accept standard AR-15 magazines.
I think standard COAL for the ar 15 is 2.62
Recycled bullet
02-20-2024, 08:48 PM
These are the two I'm looking at from gun mag warehouse.
I want the mags to not stick out so far from the bottom.
https://uploads.tapatalk-cdn.com/20240221/46160bca8c7f45e397da4c87d9439b7b.jpghttps://uploads.tapatalk-cdn.com/20240221/378fc3c2d22cecb0942bd6a1a1a72be0.jpg
Recycled bullet
02-20-2024, 08:55 PM
I think standard COAL for the ar 15 is 2.62Thank you for your response. I meant short in the height not length of the magazine.
Recycled bullet
02-20-2024, 08:56 PM
https://uploads.tapatalk-cdn.com/20240221/9a4111e263614e7b0f2ace83968ab999.jpg
elmacgyver0
02-20-2024, 09:03 PM
I like short mags too.
They also keep you from shooting up all your ammo so fast.
jimb16
02-20-2024, 09:13 PM
*LOL* I just put 5 rounds in the mag and don't worry about how much hangs down underneath!
steve urquell
02-20-2024, 09:36 PM
I am wondering about shorter length 300 Blackout specific magazines. I am shooting 225 grain powder coated lead bullets through a Ruger American Ranch Rifle. My rifle has the magazine well to accept standard AR-15 magazines.
This ProMag COL21 says "flush fit"
323655
https://www.theshootersbox.com/AR-15-223cal-5Rd-Flush-fit-Blue-Steel-Magazine_p_17777.html
imashooter2
02-20-2024, 10:48 PM
I would go with the Lancers. The magazine is a pretty important piece of a semi auto. I have zero confidence in Duramag or Promag quality. Also, try to find physical dimensions in the advertising. Many 5 and 10 round magazines are just standard 20 round mag bodies blocked to lower capacity.
sukivel
02-20-2024, 11:39 PM
I use 10 round Pmags.
Sent from my iPhone using Tapatalk
Texas by God
02-21-2024, 05:28 PM
I use 10 round Pmags.
Sent from my iPhone using Tapatalk
^^ This^^^
They don’t stick out much and always work.
Sent from my iPhone using Tapatalk
Barry54
02-21-2024, 05:33 PM
^^ This^^^
They don’t stick out much and always work.
Sent from my iPhone using Tapatalk
+1
When’s the like/thumbs up button going into effect?
10 Round Pmag for range unmodified for 5.56 and 300, when you get into big pills on the 300 you need to file/sand but no big deal. And then there are the ten rounders I have modified for my hunting 450BM/458, they have worked flawlessly for me!
popper
02-22-2024, 10:42 AM
I use 10 rnd Lancers but have a single shot mag also. Actually just blocks the mag well and you drop one in the ejection port.
Mr Peabody
05-19-2024, 11:35 AM
I use the 10 round Lancers, in my 7.62x39 AR the 10 round dur mags work great
Rapier
05-20-2024, 05:13 PM
Actually the standard 223/5.56 OAL length is 2.26 so an apparent transfer of numbers in the 2.62 number.
The P mag can give you 2.30 in length due o a different method or build. So the RN and flat nose bullets give you a bit of extra base to the bottom of the neck in internal fit. The AR-15 lower frame is designed for this magazine length box.
I have a bunch of five shot magazine for AR-15s. So there are plenty of five shot magazines avalible.
fixit
06-09-2024, 08:13 PM
It's kinda labor intensive, but it is possible to reduce the length of existing magazines...I have done so with a 6.5 Grendel magazine for my ruger American. Helped enormously with how carry-able it is!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.