View Full Version : Taurus Parts
castmiester
02-07-2024, 08:30 PM
Other than Taurus and Numrich, wording a search is the hard part sometimes.....Anybody know who sells Taurus Revolver parts ?
cwtebay
02-07-2024, 08:32 PM
eBay and Schluder probably.
Sent from my Pixel 5 using Tapatalk
castmiester
02-07-2024, 08:40 PM
eBay and Schluder probably.
Sent from my Pixel 5 using Tapatalk
Schluder not showing on thier site and nothing on ebay
cwtebay
02-07-2024, 08:43 PM
Schluder not showing on thier site and nothing on ebayWhich model?
Sent from my Pixel 5 using Tapatalk
castmiester
02-07-2024, 08:46 PM
model 66
Gunbroker parts kits usually weekly.
Texas by God
02-07-2024, 09:58 PM
Try ShopTaurus.
Sent from my iPhone using Tapatalk
castmiester
02-07-2024, 10:00 PM
Gunbroker parts kits usually weekly.
one for bid used and buy now used. I need new
castmiester
02-07-2024, 10:01 PM
Try ShopTaurus.
Sent from my iPhone using Tapatalk
did, nothing
Skipper
02-07-2024, 10:22 PM
These guys have some.
Scroll down
https://everygunpart.com/handgun-kits/revolver.html?manufacturer=71
cwtebay
02-07-2024, 10:26 PM
Schluder not showing on thier site and nothing on ebayWhat part
Sent from my Pixel 5 using Tapatalk
castmiester
02-07-2024, 10:29 PM
These guys have some.
Scroll down
https://everygunpart.com/handgun-kits/revolver.html?manufacturer=71
they don't have a cylinder yoke retaining bushing
castmiester
02-07-2024, 10:29 PM
What part
Sent from my Pixel 5 using Tapatalk
cylinder yoke retaining bushing
Forrest r
02-08-2024, 07:37 AM
You'll most likely have to buy the whole cylinder assy., which might not be a bad thing. Don't know for sure but you'd think that bushing would be the same on all their medium framed 38spl/357mag revolvers.
FergusonTO35
02-08-2024, 10:00 AM
Fleabay, should be able to get a parts kit pretty cheap.
castmiester
02-08-2024, 01:53 PM
You'll most likely have to buy the whole cylinder assy., which might not be a bad thing. Don't know for sure but you'd think that bushing would be the same on all their medium framed 38spl/357mag revolvers.
guessing you're right on that. A guy on gunbroker has a used one
castmiester
02-08-2024, 01:53 PM
Fleabay, should be able to get a parts kit pretty cheap.
I hope I can get a hold of Taurus for the bushing, but I see the yoke/cylinder for under 50, problem is they are used.
castmiester
02-08-2024, 05:08 PM
Gunbroker parts kits usually weekly.
Try ShopTaurus.
Sent from my iPhone using Tapatalk
eBay and Schluder probably.
Sent from my Pixel 5 using Tapatalk
no go. Taurus phone number is for ever on hold. Got them on the line, A rep said bring in the gun and let their gunsmiths look at it. Out of the question, I said. They won't send me out the bushing, it's restricted. Fine, I said and hung up on them.
FergusonTO35
02-09-2024, 12:33 PM
Doesn't somebody (Brownell's) sell an assortment pack of different cylinder bushings? Taurus may fix other things with it if you send it in, might be worth it.
castmiester
02-09-2024, 02:53 PM
Doesn't somebody (Brownell's) sell an assortment pack of different cylinder bushings? Taurus may fix other things with it if you send it in, might be worth it.
I ain't send them nothing.....I wouldn't have another one of thier guns if they gave me one. I only asked for a bushing. When I asked about what parts they don't sell, just asking a sarcastic question, the girl gave me a list.... ???? SO they don't sell any. I ain't sending them my gun, it's ridiculous.
castmiester
02-09-2024, 07:58 PM
Fleabay, should be able to get a parts kit pretty cheap.
it's all used junk
BINGO I think.... NOS. I asked them if it will fit a model 66
https://www.apexgunparts.com/taurus-revolver-cylinder-with-extractor-357-magnum-6rd-blued-finish-nos-pending.html
Thom_44
03-28-2024, 11:49 PM
Doesn't somebody (Brownell's) sell an assortment pack of different cylinder bushings? Taurus may fix other things with it if you send it in, might be worth it.
Sending guns back to Taurus factory support is a no go. They seem to have a bad habit of destroying guns that are not current production. Meaning the OP's gun would be destroyed automatically due to not being the 7 shot version.
Its one of the reasons I am not buying Taurus. Second reason being the factory wont sell parts to liscenced gunsmiths like Clarks. Or even Gary Reeder.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.