Taurus Parts

[castmiester]

Other than Taurus and Numrich, wording a search is the hard part sometimes.....Anybody know who sells Taurus Revolver parts ?

[cwtebay]

eBay and Schluder probably.

Sent from my Pixel 5 using Tapatalk

[castmiester]

eBay and Schluder probably.

Sent from my Pixel 5 using Tapatalk

Schluder not showing on thier site and nothing on ebay

[cwtebay]

Schluder not showing on thier site and nothing on ebayWhich model?

Sent from my Pixel 5 using Tapatalk

[castmiester]

model 66

[Gtek]

Gunbroker parts kits usually weekly.

[Texas by God]

Try ShopTaurus.


Sent from my iPhone using Tapatalk

[castmiester]

Gunbroker parts kits usually weekly.

one for bid used and buy now used. I need new

[castmiester]

Try ShopTaurus.


Sent from my iPhone using Tapatalk

did, nothing

[Skipper]

These guys have some.
Scroll down

https://everygunpart.com/handgun-kits/revolver.html?manufacturer=71

[cwtebay]

Schluder not showing on thier site and nothing on ebayWhat part

Sent from my Pixel 5 using Tapatalk

[castmiester]

These guys have some.
Scroll down

https://everygunpart.com/handgun-kits/revolver.html?manufacturer=71

they don't have a cylinder yoke retaining bushing

[castmiester]

What part

Sent from my Pixel 5 using Tapatalk

cylinder yoke retaining bushing

[Forrest r]

You'll most likely have to buy the whole cylinder assy., which might not be a bad thing. Don't know for sure but you'd think that bushing would be the same on all their medium framed 38spl/357mag revolvers.

[FergusonTO35]

Fleabay, should be able to get a parts kit pretty cheap.

[castmiester]

You'll most likely have to buy the whole cylinder assy., which might not be a bad thing. Don't know for sure but you'd think that bushing would be the same on all their medium framed 38spl/357mag revolvers.

guessing you're right on that. A guy on gunbroker has a used one

[castmiester]

Fleabay, should be able to get a parts kit pretty cheap.

I hope I can get a hold of Taurus for the bushing, but I see the yoke/cylinder for under 50, problem is they are used.

[castmiester]

Gunbroker parts kits usually weekly.


Try ShopTaurus.


Sent from my iPhone using Tapatalk


eBay and Schluder probably.

Sent from my Pixel 5 using Tapatalk

no go. Taurus phone number is for ever on hold. Got them on the line, A rep said bring in the gun and let their gunsmiths look at it. Out of the question, I said. They won't send me out the bushing, it's restricted. Fine, I said and hung up on them.

[FergusonTO35]

Doesn't somebody (Brownell's) sell an assortment pack of different cylinder bushings? Taurus may fix other things with it if you send it in, might be worth it.

[castmiester]

Doesn't somebody (Brownell's) sell an assortment pack of different cylinder bushings? Taurus may fix other things with it if you send it in, might be worth it.

I ain't send them nothing.....I wouldn't have another one of thier guns if they gave me one. I only asked for a bushing. When I asked about what parts they don't sell, just asking a sarcastic question, the girl gave me a list.... ???? SO they don't sell any. I ain't sending them my gun, it's ridiculous.

[castmiester]

Fleabay, should be able to get a parts kit pretty cheap.

it's all used junk

BINGO I think.... NOS. I asked them if it will fit a model 66
https://www.apexgunparts.com/taurus-revolver-cylinder-with-extractor-357-magnum-6rd-blued-finish-nos-pending.html

[Thom_44]

Doesn't somebody (Brownell's) sell an assortment pack of different cylinder bushings? Taurus may fix other things with it if you send it in, might be worth it.

Sending guns back to Taurus factory support is a no go. They seem to have a bad habit of destroying guns that are not current production. Meaning the OP's gun would be destroyed automatically due to not being the 7 shot version.

Its one of the reasons I am not buying Taurus. Second reason being the factory wont sell parts to liscenced gunsmiths like Clarks. Or even Gary Reeder.