View Full Version : What top punch? Lee 158SWCGC
I've got a Lee 158gr SWCGC mold. Nice bullets! Both for my 35 remington and 357 mag.
However, and I know there may not be an exact fit, I'm having some trouble with a top punch. I have a 429 but that still scrapes the sides of the bullet and leaves a ring. Anyone have any suggestions? Maybe a full WC top punch, as it is a very slightly 'semi' design with a real fat nose.
Shiloh
02-18-2009, 12:27 PM
I believe it is a Lyman 429. The same one for the Lyman #358429.
Shiloh
high standard 40
02-18-2009, 12:49 PM
Try this link.
http://www.castpics.net/
Click on the top punch reference tab on the left, then select Lee
Very useful info there.
I too have had the trouble you mention. Even had it with an RCBS top punch made specificly for my mold. I have had to modify several of my top punches for a good fit. You could also make a flat top punch and try that. I have heard of several people using this on all their SWC bullets.
Yeah, the reference is saying 429, and that's what I have that is marring the bullets. Thanks for the link though, that's a good one!
I may just make a flat top punch out of a nail or something. Or worst comes to worst fill in a top punch I don't really need with JB weld and sand smooth.
mooman76
02-18-2009, 08:53 PM
They make a top punch that is completely flat that should work. I don't know the number off hand but it works on a lot of flat point bullets making it a good one to have.
GP100man
02-18-2009, 11:40 PM
lyman top punch no. 495 is what your looking for.
GP100man:cbpour:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.