PDA

View Full Version : Lyman Pistol and Revolver Handbook, 3rd Ed.



justindad
01-20-2024, 10:19 PM
Does anybody have this manual? I have Lyman’s 49th and Lyman’s Cast Handbook #4. I found an image online of the Lyman Pistol and Revolver Handbook 2nd Ed. that had .357 Mag wadcutter data with HS-7 powder. If the 3rd edition has HS-6 with wadcutters in the .357 Mag, then I will get this manual.

Sam Sackett
01-21-2024, 03:03 PM
I have the Cast Bullet #3. It does list HS 7 with a wadcutter. If you want a copy, PM your email and I’ll send it to you.

I tried to attach that page, but it won’t work. Probably just me.

Sam Sackett

jdgabbard
01-21-2024, 10:29 PM
Does anybody have this manual? I have Lyman’s 49th and Lyman’s Cast Handbook #4. I found an image online of the Lyman Pistol and Revolver Handbook 2nd Ed. that had .357 Mag wadcutter data with HS-7 powder. If the 3rd edition has HS-6 with wadcutters in the .357 Mag, then I will get this manual.

I do own it, and just checked for you.

The Pistol and Revolver #3 doesn't have any wadcutter loads for the 357mag. Seriously, not one in there. I checked the Lyman Cast Handbook #3, no HS-6 data, only HS-7. I also checked the Lyman 47th, no HS-6, only HS-7. Sorry, it doesn't look like any of them have what you're looking for.

P Flados
01-21-2024, 10:54 PM
Wadcutters are typically loaded as low pressure ammo and HS-6 typically is a poor choice for this type of stuff.

However, if you really want to try, this is what Quickload says



Cartridge : .357 Magnum (SAAMI)
Bullet : .358, 148, LEE 358-148-WC
Cartridge O.A.L. L6: 1.590 inch = 40.39 mm
Barrel Length : 5.7 inch = 144.8 mm
Powder : Hodgdon HS-6

CAUTION: Figures exceed maximum and minimum recommended loads !

Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms

-26.0 33 5.70 813 217 9370 3419 83.1 0.999
-23.4 34 5.90 837 230 9987 3589 84.5 0.970
-20.8 35 6.10 861 244 10630 3758 85.8 0.943
-18.2 36 6.30 885 258 11299 3928 87.1 0.916
-15.6 37 6.50 909 272 11994 4096 88.3 0.891
-13.0 38 6.70 933 286 12716 4264 89.5 0.866
-10.4 39 6.90 956 301 13464 4430 90.6 0.840
-07.8 41 7.10 980 315 14240 4595 91.6 0.816
-05.2 42 7.30 1003 330 15043 4757 92.5 0.794
-02.6 43 7.50 1026 346 15875 4918 93.4 0.772
+00.0 44 7.70 1048 361 16736 5076 94.3 0.752
+02.6 45 7.90 1071 377 17626 5232 95.1 0.732
+05.2 46 8.10 1093 393 18546 5385 95.8 0.714
+07.8 48 8.30 1115 409 19497 5535 96.4 0.696
+10.4 49 8.50 1137 425 20478 5681 97.0 0.680
+13.0 50 8.70 1159 441 21492 5824 97.6 0.663