View Full Version : Have 50# pigs, need info
cptkeybrd
02-17-2009, 03:30 AM
I have 50# lead pigs we use to trim boats. I don't know the mix on the lead but it seams harder than pure lead. Any suggestions? Also need source for tin and antimony thanks
cpt
Gerry N.
02-17-2009, 03:48 AM
I have 50# lead pigs we use to trim boats. I don't know the mix on the lead but it seams harder than pure lead. Any suggestions? Also need source for tin and antimony thanks
cpt
Ballast pigs are as close to pure lead as you're likely to get. If you can scratch 'em with your thumbnail, call 'em lead. I cut mine into bite size chunks with my 8 point hand saw. A spritz every once in a while with a few drops of kerosene really speeds up the process. Deodorized paint thinner works every bit as well and keeps the missus off my case. She detests the aroma of kerosene.
Gerry N. (Retired boatbuilder)
Harmon_Greer
02-17-2009, 10:34 PM
kead bullet company uses keel metal to make their bullets from. its supposed to be 8%antimony, 2% tin and 90% lead
Harmon
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.