loadall or mec super sizer?

[reloader4410]

i loaded about a 1000 rounds of 410 on a pounder kit & need to size the brass on the loaded rounds, would the lee loadall do, or do i need the super sizer? alot of $ difference thanks

[kungfustyle]

Lee doesn't make a Load-All in 410. You could get a 444 Marlin reloading die set and a 7.62x54 shell holder and size them up. I use the 444 to resize brass shells. Another option is to get the resize ring from Mec and use it with a load all. https://www.ebay.com/sch/i.html?_from=R40&_trksid=p4432023.m570.l1313&_nkw=mec+410+size+ring&_sacat=0
Ether get creative or $$. One more option is to find an old Mec JR and then buy the conversion kit from ebay/mec. https://www.ebay.com/itm/273217130305?epid=1001088274&hash=item3f9d028f41:g:Ve4AAOSwgsla~IK0&amdata=enc%3AAQAIAAAA4Eg8sqGziJy8Vg80yfz997PiT59hr fUr1qg%2Bz%2BT%2FmAXnuG0LmDP94eWdK4vDNA%2FZDOyuG4F P1FBVaLx%2BeTOTzFIKalecPUPJVDtJvlb8debSp8UcKM4gngx ZbiFBbJ5ISrUnVqJvZsx0dNjvTzMWYoc9Dt%2BrU7thQZKIuGu 4yayAAq34qSmIknkjtPVKVnXIiEpDAqepm6%2BM%2B80kxUZns AxxMk2DFlEq%2FMMKHgNbEJexShP0srSSh8JNQQB9DQRF6l85f rYPCXSm6G2H8D8uacyM1Hl2tVeIy0O%2BNqAM4bcx%7Ctkp%3A BFBMiILl05hj
You'll still be looking at $200 or more

[reloader4410]

thanks will give it a try, happy trails

[MarkP]

Since they are loaded I think you would need to use a Mec Grabber typer sizer. (segmented fingers) Could make a .410 sizing ring; the trick would be to get the ring off a loaded shell using a loader and not buckling the shell or messing up the crimp when stripping forces are high. When using a sizing ring you would probably need to take the decapping pin out of the sizer and maybe use the primer station to strip the sizing ring off. I think this may work on my DL-266 410 loader not sure if I could with a Mec 410. Would want the sizer to support the whole shell so it would not buckle the loaded shell when stripping it off

I do not recall where I saw this; someone machined delrin or UHMW tubes that would the 410 shells would slip into and he would use a 12 ga LEE Load All to load the shells. Kind of like a LEE Loader combined with a Load All.