PDA

View Full Version : Can anyone tell me what this is?


happy7
02-16-2009, 08:41 PM
Got another mystery tool question. Came in a box of molds. It appears to be for shearing things. The two holes are .340" and .390" approximately. The three holes are countersunk and appear to be for mounting to a bench. I haven't got a clue. There are no markings on it. It is probably homemade, although the quality of workmanship is very good.
RayinNH
02-16-2009, 08:45 PM
Cutting lead cores for bullet swaging would be my guess...Ray
GP100man
02-16-2009, 09:02 PM
+1 for Rays answer, with adjustable stop ( the bolt).

GP100man :castmine:
deltaenterprizes
02-16-2009, 09:43 PM
+2 for core cutter
Pressman
02-16-2009, 11:31 PM
+3 for a core cutter and possible a C-H made tool.
Ken
happy7
02-17-2009, 11:14 AM
Thanks a lot for the help. I have never gotten into swaging. But after you guys saying what it was, I looked and found Corbin's core cutter online. After looking at theirs, I am sure that is what I have. I have no use for it, but will polish the rust off it today and put it up over on the swappin forum for $20 or so.