Anyone used Matt's Bullet's ?

[bcraig]

If you have I would like to hear your'e input from using the bullet's.

[Outpost75]

I use Matt's Bullets for several calibers I don't cast for myself and have been well satisfied.
I can recommend them highly.

[MostlyLeverGuns]

I have had very good results with Matt's Bullets. I use his .310 185 grain spire point gas check in a .308 Savage 99(4.5-14 Leupold) and a .300 Savage 99(4.5-14 Burris), my 'range' rifles, usually 1.5 MOA at 100 and 200 yards with them, 5 shot groups, usually 19-10 grains 5744. Also use the .323 flat nose gas check in my Marlin 336 A .32 Special (24", 4-12 Simmons), again 1.5 MOA at 100 yards. I have used also used some of the 9mm and .38 bullets. I have good results with 205 grain round flat nose, .360 as I requested, in my Marlin 35 Rem but have not really worked on load development. He produces a quality product.

[challenger_i]

I have had very good service from Matt's, and the bullets purchased performed well.

[Gobeyond]

They always answer my questions. They have good prices for today’s market. I bought some collar buttons for 452, a couple sets. All depends on if you find the bullet you want, but good service.

[Uncle Grinch]

Add me to the list. I have used their 44 caliber wad cutter in my GP100 44 SPL with good results. Also their customer service and shipping was very good.

[4bisley5]

I use his version of the 260 gr. Keith in my 45 Colt. It shoots every bit as accurate as my home cast version. Highly recommend Matt's.

[stubshaft]

I have used Matts Bullets in a number of calibers and found them to be very consistent and accurate.

[AZspirit]

I use Matt's Bullets mainly 45 handgun, everthing I have received from him was excellent and consistant. they will answer any question quickly just like the shipping, prices are very good as a bonus.

[5090SS]

Has a nice selection of bullets to try before you go looking for a mould. Ships out fast too. Well worth a try.

[JoeJames]

Has a nice selection of bullets to try before you go looking for a mould. Ships out fast too. Well worth a try.I used them to work up a load for my 38S&W Victory Model in their 380/200 Mk1 bullet. It was a good idea; since I was able to discover the Victory Model was not very accurate. Saved me the cost of buying a mold and then discovering that. They are about 20 miles from me; so it was also a good thing to use a local bidness.

[Tall]

Me too, I got the 200 grain bullets from Matt's for my Enfield 38 top break. I have used Matt's several times recently and have no complaints.

Oops - I do have one. The website is rotten. I have to use Google and then go to the Matt's main page. Any link I try to save will not work.

[Bazoo]

I have some .458 365 RF bullets to try in 45-70, it's my first experience with his bullets. They seem well cast.

[Electrod47]

Have used Matt's for years.....Good Stuff. Small batches are handy, plus he makes shapes and weights no one else does.

[jem102]

Very good results with his .41 and .44 wad cutters in my S&W's.

[725]

They have worked well in a buddy's .32 Win. When ordered, he requested a softer bullet than Matt's usual production. No problem and no additional costs.

[bcraig]

Good information
Thank’s to all