View Full Version : Anyone used Matt's Bullet's ?
bcraig
11-14-2023, 10:35 PM
If you have I would like to hear your'e input from using the bullet's.
Outpost75
11-14-2023, 10:51 PM
I use Matt's Bullets for several calibers I don't cast for myself and have been well satisfied.
I can recommend them highly.
MostlyLeverGuns
11-14-2023, 10:52 PM
I have had very good results with Matt's Bullets. I use his .310 185 grain spire point gas check in a .308 Savage 99(4.5-14 Leupold) and a .300 Savage 99(4.5-14 Burris), my 'range' rifles, usually 1.5 MOA at 100 and 200 yards with them, 5 shot groups, usually 19-10 grains 5744. Also use the .323 flat nose gas check in my Marlin 336 A .32 Special (24", 4-12 Simmons), again 1.5 MOA at 100 yards. I have used also used some of the 9mm and .38 bullets. I have good results with 205 grain round flat nose, .360 as I requested, in my Marlin 35 Rem but have not really worked on load development. He produces a quality product.
challenger_i
11-15-2023, 01:27 AM
I have had very good service from Matt's, and the bullets purchased performed well.
Gobeyond
11-15-2023, 01:55 AM
They always answer my questions. They have good prices for today’s market. I bought some collar buttons for 452, a couple sets. All depends on if you find the bullet you want, but good service.
Uncle Grinch
11-15-2023, 05:59 AM
Add me to the list. I have used their 44 caliber wad cutter in my GP100 44 SPL with good results. Also their customer service and shipping was very good.
4bisley5
11-15-2023, 07:38 AM
I use his version of the 260 gr. Keith in my 45 Colt. It shoots every bit as accurate as my home cast version. Highly recommend Matt's.
stubshaft
11-15-2023, 01:09 PM
I have used Matts Bullets in a number of calibers and found them to be very consistent and accurate.
AZspirit
11-15-2023, 02:08 PM
I use Matt's Bullets mainly 45 handgun, everthing I have received from him was excellent and consistant. they will answer any question quickly just like the shipping, prices are very good as a bonus.
5090SS
11-15-2023, 11:16 PM
Has a nice selection of bullets to try before you go looking for a mould. Ships out fast too. Well worth a try.
JoeJames
11-16-2023, 09:35 AM
Has a nice selection of bullets to try before you go looking for a mould. Ships out fast too. Well worth a try.I used them to work up a load for my 38S&W Victory Model in their 380/200 Mk1 bullet. It was a good idea; since I was able to discover the Victory Model was not very accurate. Saved me the cost of buying a mold and then discovering that. They are about 20 miles from me; so it was also a good thing to use a local bidness.
Me too, I got the 200 grain bullets from Matt's for my Enfield 38 top break. I have used Matt's several times recently and have no complaints.
Oops - I do have one. The website is rotten. I have to use Google and then go to the Matt's main page. Any link I try to save will not work.
Bazoo
11-16-2023, 07:10 PM
I have some .458 365 RF bullets to try in 45-70, it's my first experience with his bullets. They seem well cast.
Electrod47
11-16-2023, 07:18 PM
Have used Matt's for years.....Good Stuff. Small batches are handy, plus he makes shapes and weights no one else does.
jem102
11-18-2023, 11:45 AM
Very good results with his .41 and .44 wad cutters in my S&W's.
They have worked well in a buddy's .32 Win. When ordered, he requested a softer bullet than Matt's usual production. No problem and no additional costs.
bcraig
11-19-2023, 12:29 AM
Good information
Thank’s to all
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.