View Full Version : What shellplate is this?
Postell
11-04-2023, 10:16 PM
Hello, who has an idea what press this shell plate fits?
It was in a sealed bag in some reloading tubs I bought from a friend.
319614
319615
M-Tecs
11-04-2023, 10:31 PM
Looks like a Dillon 650/750. If it is its for 44Spec/44 Mag.
https://www.dillonprecision.com/media/manuals/xl650-caliber-conversion-chart.pdf
Postell
11-04-2023, 11:19 PM
Looks like a Dillon 650/750. If it is its for 44Spec/44 Mag.
https://www.dillonprecision.com/media/manuals/xl650-caliber-conversion-chart.pdf
I thought a 650 measured 2 3/4" this plate is 2 5/8ths
M-Tecs
11-04-2023, 11:28 PM
I thought a 650 measured 2 3/4" this plate is 2 5/8ths
I just checked. My Dillon #4 measure 2.725"
dillonhelp
11-06-2023, 07:26 PM
Earlier 650 shellplate for 44 Mag/Spl. Earlier ones had the detent hole bored through, with a plastic plug in the top to keep debris out. Now this hole is blind.
Someone has really polished the area around the detent holes!
jmorris
11-10-2023, 10:39 AM
The station 1 locator is the most obvious indicator, that is only used on one frame and their are only two presses that use it, the 650 or 750.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.