View Full Version : Help broke part on MAS 49/56
corvette8n
02-14-2009, 05:04 PM
I was cleaning my French MAS 49/56 and broke the nylon cocking knob, it is in little pieces.:( I googled and searched all of the auction sites, Numerich etc. no luck.
Anyone else have any idea?
Shiloh
02-14-2009, 06:35 PM
Good Luck!!
Try Sarco. http://www.sarcoinc.com/
If they can't help, maybe they can steer you to a source. They have lots of odds and ends.
Shiloh
Freightman
02-14-2009, 06:56 PM
Make one may be your only option!
Brass door knob? Or send the old one to somone with a lathe and turn anew one from delrin.
primersp
02-17-2009, 06:12 AM
hello
i will asked on a french forum ,if i have a answer i tell you
regards
primersp
02-17-2009, 09:38 AM
find one if you want i can purchase and send to you
tell me what you want do by pm
meanwhile you can made one in epoxy in a little tube
regards
Pourriez-vous partager l'adresse ce site Web?
primersp
02-22-2009, 02:49 AM
tirmaillyforum.com on m'a donné le telephone d'un gars qui vend des pièces détachées d'armes réglementaires ftançaises
si ça interesse quelqu'un demain je mettrai son adresse.
la pièce 14 euro+6 euro de port.
corvette8n
02-22-2009, 03:09 PM
I found a nylon spacer in Lowes about an inch long, I drilled it out a little and tapped it on, took it to the range and it worked great.
StarMetal
02-22-2009, 03:53 PM
Sign up here and inquire:
http://forums.gunboards.com/forumdisplay.php?f=11
Joe
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.