Winchester USA Ready 230 grain TC flat point

[COUSIN DANIEL]

This ammo shoots amazing in my 1911s, can anyone tell me how I can pull a bullet and have a mold made to this projectiles's exact dimensions?

Thanks

[lotech]

Look at SAECO/ Redding designs. For many years, I've used one that casts a 230 grain flat nose bullet. The only drawback is that it is a bevel base design.

[txbirdman]

Have you looked at the Lee mould? That one shoots well for me.

[dondiego]

This ammo shoots amazing in my 1911s, can anyone tell me how I can pull a bullet and have a mold made to this projectiles's exact dimensions?

Thanks

You will need an inertia bullet puller that is pounded on a piece of wood and the weight of the bullet pulls itself out of a case. They are fairly inexpensive and a must have for any reloading bench.

[mdi]

I too use the Lee 452-230-TC for my 3 45 ACP guns, ZI used a drill to remove the beveled base to cast flat bases. Sizing the bullet smooths out any irregularities and I get a flat base with good corners. Works quite well for me...

[oley55]

You will need an inertia bullet puller that is pounded on a piece of wood and the weight of the bullet pulls itself out of a case. They are fairly inexpensive and a must have for any reloading bench.

^^^this^^^

[fredj338]

You can pull a bullet & measure specs. Match it to a mold from Accurate or modify one of his molds to get exactly what you want. Though I think the Lee 230TC is pretty much what most will look like.

[bigboredad]

You can pull a bullet & measure specs. Match it to a mold from Accurate or modify one of his molds to get exactly what you want. Though I think the Lee 230TC is pretty much what most will look like.That's the way I'd go. He may already have that in his catalog.you light try that first


Sent from my 9048S using Tapatalk

[BLAHUT]

This ammo shoots amazing in my 1911s, can anyone tell me how I can pull a bullet and have a mold made to this projectiles's exact dimensions?

Thanks

INERTIA bullet puller

[Ia.redneck]

Accurate 45-230Q

They are great molds!