PDA

View Full Version : Another silly question



Guncotton
02-13-2009, 09:11 PM
I just picked up some 45cal 540 gr Boolits from Montana boolit Co. Their was some lube included which looks like a wax base. After melting how is it applied to the patch. Do I dip the boolit or brush it on or use my fingers or?

NSP64
02-14-2009, 04:31 AM
I would not use it. I use JPW just before sizing. You want the patch to cut and fly off after it leaves the muzzle. When fired you should see confetti in front of you.:drinks:

pdawg_shooter
02-16-2009, 09:24 AM
I lube my dried bullets with BAC by smearing some on the bullet and running it through a push through die to remove the excess.