View Full Version : Homemade Powder Trickler/Scale Setup
greybuff
09-27-2023, 06:04 PM
Built a stand to hold my trickler, funnel. scale and dipping bowl. Made from 1/4" plate so the scale has a good solid base to sit on with the trickler set up to drop right over the powder pan.
318366
8-) nice set up. compact. i used a scale and trickler many moons ago.
Three44s
09-28-2023, 09:29 AM
Good job!
I run various powder measures depending on what powder I am dispensing and trickle to weight on a scale for most rifle loads.
I built and elevated mini-table for my mechanical scales and trickle to be operated from.
I do need to further elevate my RCBS trickler to gain a bit of clearance 9ver the scale pan however. A bit of weight and a little height.
Best regards
Three44s
jmorris
10-04-2023, 08:26 AM
I did something similar except I used the 1/4” plate to mount a few other things to.
https://www.youtube.com/watch?v=6GYWgAdKzHs&t=2s
Three44s
10-04-2023, 10:12 AM
jmorris,
Thanks for sharing that video again. It's a timeless testament to American ingenuity!
I especially get a kick out of the "poop chute" that shifts your gun powder down and into your scale pan.
Three44s
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.