Bird
09-27-2023, 04:26 AM
Got the recent style 9mm-357 inline bullet feeder. It will just about fit on top of my pro 1000 press using the 5 tube feeder kit. I feed primed and neck expanded brass into station 1 which has the powder drop and case mouth flare. Station 2, bullet drop/feeder. Station 3, bullet seat.
I wipe the cast bullet bases and load all 5 tubes, and send 150 rounds through the press in 1/2 hour. No problems with feeding, and it cuts out the fumbling and lube everywhere in station 3. I like it. A worthwhile addition.
I could do with a 4 or 6 station press, then I could also add the taper crimp instead of running them through the press again.
I wipe the cast bullet bases and load all 5 tubes, and send 150 rounds through the press in 1/2 hour. No problems with feeding, and it cuts out the fumbling and lube everywhere in station 3. I like it. A worthwhile addition.
I could do with a 4 or 6 station press, then I could also add the taper crimp instead of running them through the press again.