Dillon Locator Buttons

[MSUICEMAN]

I made STLs out of all the data I could find (plus some measurements of my own) for Dillon locator buttons. Can't find info for #6, but that is for Short or Super Short Mags, which I don't and wouldn't reload on my 550 anyways.

I still need to print out to test, but once I do I will post to either github or some other repository and will link you.

If anyone has dimensions for the #6 pin, let me know.

Almost wonder if ABS shellplates could take the stress from sizing some cartridges, hmmmmm

Steve

[rancher1913]

it will rip the lips that hold the brass right off, it already does it to the dillon plates sometimes, most automated users go with aftermarket heavy ones.

[MSUICEMAN]

you are more than likely right on the shellplates. though i've loaded probably 20+k rounds on my 550 without issue, may also be cartridge specific. should work fine for locator buttons though.

[MSUICEMAN]

https://github.com/MSUICEMAN/Alternate-Locator-Buttons-for-Dillon

think i made a public repository correctly.

[TribunusSanGeorgii]

Thanks for sharing!