Seeking experience Lyman 452651

[cwlongshot]

I fold this old thread; https://castboolits.gunloads.com/showthread.php?94363-Anyone-shooting-Lyman-452651

Wondering if any new information was avalible. Who is using for what calibers Do you like or recomend?

I have the LEE 300/310. I have the RCBS 300 and 270ssa too.
I had a 315/325 LBT but seem to have miss placed it.

CW

[Greg S]

If you can, get the Lyman mold made for freedom arms. I've given up on the mold. I've returned 2 2c molds for casting undersized or out of round with foundry cert lyman alloy.

[cwlongshot]

Yea, Lyman molds in general have had there issues and like too many things today declined in quality.

Undersize isnt as big with my as I powdercoat most all I cast today.

Out of round is a non acceptable unfortunate reality...

Thanks man!

No one else used this bullet??

[Greg S]

NOE is making a copy of this mold and have thought about getting a copy but since have picked up A 4C MP 452-325 GC/HP Ruger Only and a 4C 452-340 GC/HP.

[Dom]

I use the Lee 310gr GC in my Ruger Blackhawk, 4 5/8" Bbl . Have used heavy loads ( Ruger Only ) of 2400 with excellent results.. My only deviation is, I installed Hogue soft rubber grips for control because of recoil. Cases fall out & primer pockets stay tight, load after load. Also have an Accurate 45-297G. This drops from my mold at 300grs, plain base.Using the same charge of 2400 as the Lee 310gr, also yields excellent results.