Broken ladel

[Netherwolf]

Hey guys,
I broke my cast iron lead-dipping ladel. I went to E-bone but no luck. Went to the local ACE Hardware - no luck (they even went through three catalogs the size of a NYC phone book to see if they could order one for me). So here's the question; where can I get another cast iron ladel? If anyone knows where to find them it'll be someone here.
TIA,
Netherwolf

[chuebner]

netherwolf,

Go here, good ladles. I use the one pound size for all my casting.

http://www.theantimonyman.com/ladles.htm

charlie

[jhrosier]

here's another:

http://www.jannsnetcraft.com/lead-melters-tools/025724019114.aspx

Jack

[mikenbarb]

Send it to me and I will weld her up like new. Just pay the shipping.:drinks:

[runfiverun]

lyman makes them too as well as rowell and lee and rcbs...

[dromia]

The Rowells, Lyman and RCBS are all fine ladles, can't recommend the Lee for dipping though.

[cabezaverde]

Send it to me and I will weld her up like new. Just pay the shipping.:drinks:

Mike, I have a cast iron one that the handle broke on. Can you do anything with it?

[mikenbarb]

Yep, I weld about every alloy known to man. Shoot me a pm and I will hook you up.

[Netherwolf]

Hey guys,
Thanks for the links & the repair offer. I have one more local possibility to check into. If that falls through I'll be back here.
Netherwolf

[madman]

I just did a search there are hundreds of them out there for as little as 7.00 for a 1 1/2 pounder.

[Netherwolf]

I just did a search there are hundreds of them out there for as little as 7.00 for a 1 1/2 pounder.

Hey Madman,
The cheapest one I found on line was $15.00 + S&H. I found a local who brazed mine back together for $5.00 (but thanks for the links on the $7.00, 1.5 pounders just the same).

Netherwolf

P.S. My sincere thanks goes out to all who provided links & offers to help.
P.P.S. Moderator(s) please feel free to delete this thread. I'm good to go for now & will repost if SHTF in the future.