Hornady Bullet Comparator 35-cal bushing EXACT measurement

[condor13]

Anybody out there having a set of calipers and a Hornady Bullet Comparator 35 caliber bushing that could pass along some info for me? I want to turn a 35-cal bushing but don't know the exact ID of the 35-cal bushing. Anybody? Thanks, Greg

[TurnipEaterDown]

By "Exact", what are your qualifications?
ID gauge, or dial caliper? I have second handy, and should have the bushing.
It's a comparative measurement device, should not have to be exact, I don't know what Hornady tolerance range is.

[condor13]

Hey TurnipEaterDown, thanks for the response. I shouldn't have used the word 'exact' in my post. A dial caliper reading would be great. Thanks, Greg

[TurnipEaterDown]

On the Stoney Point 35-10 insert (Hornady bought the Stoney Point tool rights), it measures a smidge over 0.349" w/ my caliper.
The 30 insert measured a smidge over 0.297", and the 37 right in at 0.366". Maybe these other two give an idea of tolerance, seems like they are just short of bore (not groove).

[condor13]

Perfect. Just exactly what I needed. Thanks so much for the help. I appreciate your effort. Greg