PDA

View Full Version : .45 ACP W/ LongShot



Krh1326
07-14-2023, 12:58 PM
Anyone try .45 ACP with LongShot?
I know it’s a slow powder, prolly wouldn’t be as good as HP-38/ 231, but it is working well in my .40sw and .357 sig. Made up some 9mm, but haven’t been to range with it.

nicholst55
07-14-2023, 11:48 PM
I tried it with 185 grain Gold Dots, which were the only .45 bullets that I had at the time. LongShot was also the only powder that I owned at the time. I got a lot of soot on the brass, because the cases weren't sealing the chamber well. I bought some other powder(s) and never looked back. LS works very well with some cartridges, some others not so much.

FullTang
07-15-2023, 12:40 AM
I absolutely love love love Longshot and the closely-related CFE Pistol in .45 Auto; very easy to load, works with essentially all bullet weights and types, and gives the highest velocities with modest powder charges. Probably not the best choice if you're looking for lighter loads, but if you want a nice stout load, it's great stuff. I have not found it to be dirty, but I've mostly stuck to the higher-end loads. I load 12 gauge, too, so this does double duty for me; it's fantastic for potent shotshell loads as well.

JT78
07-17-2023, 06:12 PM
There is lots of load data out there for it but I prefer cfe pistol in my 45 loads I run 230gr and 5.8gr of cfe. I have lots of Longshot on hand but I use it for my 10mm rounds.

dla
07-23-2023, 10:40 AM
My results are poor until you get the pressure up past +p. Longshot is really too slow for standard 45acp, but it us very good for 45 super and 460 Rowland.
I use Silhouette for my 185gr @1100fps loads.

oger
07-23-2023, 10:44 PM
Been using it for a long time but as others have said use it with heavy charges and heavy bullets.

justindad
07-24-2023, 12:16 PM
It cycles my slide better than Silhouette and True Blue. It’s loud, which makes it more fun. Heats up the brass more than anything else I’ve tried, which could reduce brass life. I shoot a 230 grain round nose boolit at the max charge. SD in velocity isn’t super tight (around 30, IIRC). Burns clean and I have not had any leading in my barrel (92-6-2 alloy, with FWFL). I like it in .45 ACP.