View Full Version : Quick fix for droopy press handles
reloader X
06-08-2023, 10:01 PM
The magnet out of a microwave...i'm sure you guys have some laying around...anyway i glued it to the press so you dont mess about with it going where it wants. break/cut the magnet in 2.
https://i.imgur.com/vUPgOve.jpg
scattershot
06-08-2023, 11:48 PM
Great solution. Thanks.
reloader X
06-09-2023, 12:11 AM
Great solution. Thanks.
there is a lot of different things you can make from microwave guts..
i'll snag one off the curb if i see it
rcslotcar
06-09-2023, 12:22 PM
That looks better than the blue tape I use.
CastingFool
06-09-2023, 08:41 PM
The handle on my rcbs jr started to droop. Out of curiosity, I contacted rcbs. They sent me a couple of wave washers . took care of the problem. No charge, of course
reloader X
06-10-2023, 11:24 PM
The handle on my rcbs jr started to droop. Out of curiosity, I contacted rcbs. They sent me a couple of wave washers . took care of the problem. No charge, of course
mine has them also....i just can't be arsing around with droopy handles
ndnchf
06-23-2023, 08:24 AM
I made a counterweight for my Spartan press. It works great.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.