View Full Version : New Lee #1 buckshot mold..........
HiVelocity
05-23-2023, 04:41 PM
Just thought I'd let everyone know that Lee is now producing an 18 cavity #1 (.30 cal) mold.
I've casted up about 8lbs so far and tried loading some, works awesome, NO ISSUES. Remind me to NOT provide "samples" to friends.
HV
pipehand
05-24-2023, 06:42 AM
I'm resisting the urge to order that one because I havent really had time for much casting or shooting lately. But my resistance has been known to weaken at times. Have you tried any 16 pellet 2&3/4" 12 gauge with it? Thinking of an 8 to 10 pellet 20 gauge also.
jsizemore
05-24-2023, 05:24 PM
What's the actual diameter and alloy you used?
FrankJD
05-24-2023, 08:48 PM
I've had and used the Lee #00 buckshot mold, it was okay. Now I have a Marty's Mold in .310" on order that will powder coat to .320".
HiVelocity
05-28-2023, 12:44 AM
Folks, I'm on my 5th or 6th batch of these .30 buckshot (I tumble 3-4lbs at a time)
I'm loading 12 pieces these in ONLY 2 3/4" with the CB1138-12 wad w/20ga overshot card in the bottom, and Longshot powder. "Samples" I've handed out to friends swear by this handloads at 50 yards.
HV
HiVelocity
05-28-2023, 12:46 AM
jsizemore-
These mic out at .310 from the sampling I mic'd.
HV
jsizemore
05-31-2023, 02:26 AM
jsizemore-
These mic out at .310 from the sampling I mic'd.
HV
Thanks for checking and posting. You saved me some money.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.