Mould ID from a .452-300 TC .

[Harter66]

I have a box of 452-300 TC 2 crimp groove Bear Creek Bullets .
At this point they are working out well in the stupid slow twist 45 Colts carbines as a heavy sub to make up for the lousy performance of 255 SWCs past 75 yd . Nope not in this thread .

I'd like to get a copy of this mould because it's working and it feeds well . There's only 200 left in the box and I'll have to fool with the alloy some . Also they are fine in the rifle but too small for the pistols . 313908

[littlejack]

That looks like a SSK design. I believe NEI use to make those moulds. If you look up SSK mould designs, you will see different calibers and weights.

[littlejack]

I'm sure Tom at Accurate Molds can make you anything you want. Look up his mould selections. He may already have one that matches those boolits you have.

[deltaenterprizes]

Check the Magma site if it is a commercial bullet!