FA Decapper

[deltaenterprizes]

I was having trouble with decapping some 223 range brass to load for a rifle class.
I posted my laments in the Our Town section and a member informed me about the FA Decapper and I researched it and ordered one.
It came in today and so far my problem has been resolved!
There is another company that makes a similar one but I can’t remember the name.

[Walter Laich]

https://www.creedmoorsports.com/product/k-and-m-deluxe-hand-primer/Reloading?gad=1&gclid=CjwKCAjwge2iBhBBEiwAfXDBR-5xr0nAr4Q4THss8z3HXZd6WvcrtgbDttCsuJJfsFyIV94Uz1XB YhoCwu0QAvD_BwE

https://harveydeprimer.com/

berdan decapper: https://www.amazon.com/RCBS-9525-Berdan-Decapping-Tool/dp/B0002INRT6

[Sasquatch-1]

I have had the FA for a couple of years now. The biggest problem you may run into is that the de-capping pin may stick in the flash hole of some brass. I forgot what size I used, but a drill bit just a hair over the flash hole size cures the problem. Keep a set of pliers handy to pull off the stuck brass. A slight twist and pull does the trick.

[MrWolf]

I have the Harvey deprimer noted above. I much prefer depriving off my press and it is real easy just watching TV while doing it.

[GunsandCoffee]

I also own the Harvey and it's the bees knees.

Highly recommended.