Cast bullets in Bergara barrel.

[jeffs4wheeler]

Just got a CVA scout pistol. they use Bergara barrels on these guns. Just would like to know if anyone has tried cast bullets in aBergara barrel and how did they shoot.

[charlie b]

Would work as well as any other barrel. You might check out similar postings on cast in Contender/Encore pistols as shorter barrels can prefer different bullets than rifles in the same cartridge.

[Intel6]

I picked up a CVA pistol in .300 Blackout a while back. I bought it to mainly shoot cast bullets out of it. I knew that they had Bergara barrels on them and when I got it the barrel it sure looked like a quality made barrel. I shot a bunch of junk 150 gr. FMJ reloads in it first and was encouraged by the results because it shot so good.

I then started with some load development with cast and was pleasantly surprised at how good it shot. My main two loads in .300 BO are with a NOE 150 and a NOE 200 gr bullet and they both shoot excellent out of the barrel. The barrel has been great with no issues with fouling etc. I typically use a pull through with my cast bullet guns just to take out the carbon and anything else and the barrel has been immaculate, and I couldn't be happier.

Depending on the caliber of your Scout, I think you will be pleased with the barrel.


Here is mine with a Leupold 4x

311254


In this pic you can see the two NOE bullets I use, these are coated with HiTek. The NOE 311-199-SP-K5 on the left and the NOE 311-152-SP-L1 is on the right. They both shoot great in the CVA.

311255

[popper]

Scout2 rifle, 300BO @ 100 yds. with just front bag.
311266