What is beagling tape?

[seabat0603]

This may sound like a stupid question, and I have asked a few in my day. What is beagling tape? It was mentioned on a list of things to get when slickin up lee molds. I drilled and taped the holes like the article said without any problem. Every where I went I asked people if they knew what that stuff was. No one and I mean no one knew. If it was intended as a joke, well ya got me. If it's real , please educate me someone. Thanks-seabat0603:confused:

[OldBob]

I think most are using the metal foil tape that HVAC stores use on ductwork, send me a PM with your address and I'll mail you a strip of it.

[sundog]

3M High-Temperature Flue Tape 2113NA. I got mine at the Ace hardware in town, but they had to order it. Rated for 600dF.

The HVAC stuff works, but after awhile the glue gets a little seepy and the tape moves around. That does not happen with the flue tape.

Clean up required a good solvent like card cleaner, coleman fuel, mek, or the like.

[Calamity Jake]

You only need the beagle tape if you have molds that cast undersize and you need the boolets bigger in diameter then it is used to shim the mold open a little.

[wiljen]

PM me an address and I'll send you some. I've got several lifetime supplies in the role I have.

[fourarmed]

One layer of the aluminum duct tape will increase boolit diameter about .001", while the flue tape will produce about .003". At least, that is what happened with the brands I bought at my hardware store.

[montana_charlie]

What is beagling tape?
Every where I went I asked people if they knew what that stuff was.
No one and I mean no one knew.
Did you ask the local canine club?
CM

[seabat0603]

I live in a small mid west farming town, no dogs here, just cats. I think they shoot dogs here.lol
( just a joke for all you PITA nuts)