View Full Version : 45 acp barrel work
beemer
02-02-2023, 04:46 PM
Yesterday I got back the barrel that I sent to DougGuy for throat work. It always leaded in the throat and the bullets needed to be seated deep. Today I gave the pistol a good workout, those problems are gone. Thanks Doug.
Dave
TyGuy
02-06-2023, 11:03 PM
I’ll second this. I had an aftermarket Glock 17 barrel that refused to plunk most cast bullets without seating deeper than I was comfortable with. Doug recently worked his magic on it and now that barrel happily gobbles up everything I’ve fed it. I couldn’t be more tickled.
TCLouis
02-11-2023, 07:40 PM
Just to prove how good he is, years ago I sent him a cylinder and it was back in about a week.
Note in the box said 'it is fine as it is I did not do anything to it'
Cosmic_Charlie
02-20-2023, 10:23 AM
I have had both barrels and cylinders done by Doug. Well pleased with the results.
littlejack
02-21-2023, 08:21 PM
Back in January, I had Doug lengthen the throats on three 9mm barrels. I was having to seat my cast boolits too deep to "plunk". Now, all three barrels will accept all my properly seated boolits. Thank you Doug.
Doug is one of the good guys.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.