Stuck Hammer Sharps Replica Resolved

[Barman54]

Well,

I took a Leep, and removed the Action, two screws on the Left.
Tight fit but was able to remove it.
Seems the "Bridle Screw" had worked itself loose enough to Block the Hammer.
Tightened it back up, Hammer works now, carefully reinstalled action.

Thanks to all !!

Barman54
Out

[marlinman93]

Well,

I took a Leep, and removed the Action, two screws on the Left.
Tight fit but was able to remove it.
Seems the "Bridle Screw" had worked itself loose enough to Block the Hammer.
Tightened it back up, Hammer works now, carefully reinstalled action.

Thanks to all !!

Barman54
Out

Might consider taking it back out and put some Loctite Purple or Blue on the threads to keep it from working loose again.

[Barman54]

Maybe next time, it is all buttoned up, good thought!
Thx,
Barman54
Out