Burris FF3 on a .22 rifle

[Texas by God]

At the LGS today, I spotted Weaver “Tip off to Weaver” conversion bases. I’ve been looking for a way to try this sight out on my oldest Nylon 66.
It’s a bit high but sighted in quickly and I was hitting old tangerines in no time. I used both bases- they have opposing clamp screws so alignment is adjustable. I believe the base numbers are 122. https://uploads.tapatalk-cdn.com/20230101/1ab849f7127abd0e71ed05bf0ab2ea25.jpg
https://uploads.tapatalk-cdn.com/20230101/954e2aac7844695202f06f0c67575878.jpg


Sent from my iPhone using Tapatalk

[Baltimoreed]

I’ve mounted my Burris FF3 on a Woodsman, a Model 41 and a two .45pcc’s and as soon as I get an offset mount I’ll try it on my AR.22 build. A very handy little sight. I have 2.

[Texas by God]

I’m looking at modifying a Weaver base to clamp to a D&T’d dovetail blank base- to mount one to my 94 Winchester.


Sent from my iPhone using Tapatalk

[nseries]

I’m looking at modifying a Weaver base to clamp to a D&T’d dovetail blank base- to mount one to my 94 Winchester.


Sent from my iPhone using Tapatalk

Seems to have gone up in price I believe, but here's an option for mounting a FastFire on a 94.

https://www.turnbullrestoration.com/gun/dovetail-red-dot-mount-vortex-venom-burris-fastfire-winchester-94-1892-barrel/

[W.R.Buchanan]

That is about the cleanest mount for a Red Dot on a Levergun I've seen! well done! It will keep a lot of people shooting for a long time!

Randy