Hi new guy here

[Hondolane]

Was told about this forum and decided to join. Been casting, loading for a few years and look forward to getting more knowledge.

[BLAHUT]

Welcome

[country gent]

The knowledge is free you just need to bring the container for it.

Knowledge is one of the few things that can be given away and kept at the same time.

Welcome

[Hickok]

Hello to ya from West Virginia!

Great group of people here, with vast amounts of cast bullet knowledge!

[Minerat]

Welcome, we are glad you joined. There are no dumb questions so if you can't find an answer just ask, someone here will answer or give you a link to the answer. Share your knowledge or insights and become an active member.

An important rule is that you can not sell, or trade or run an auction until you have 30 meaningful posts and been a member for 30 days. If you see something you need in S&S you can buy it.

[rockrat]

Welcome. I would advise you to start a "Mould fund", to help buy all the moulds you didn't know you couldn't live without!!

[slim1836]

You're in trouble now, welcome.

Slim

[Bazoo]

Howdy from Kentucky.

[hc18flyer]

Welcome to the CB forum, awesome folks here, always willing to help! hc18flyer

[45workhorse]

Welcome. I would advise you to start a "Mould fund", to help buy all the moulds you didn't know you couldn't live without!!

Just think of all the money you will save.
Welcome to the club.

[Land Owner]

^^^^^^ That is the "Siren's Song" and WHY we cast! ^^^^^^

...plus, the investment pays back many times over.

Welcome from
Mims, FL

[Misery-Whip]

Take full advantage of the swaping and selling section. Lots of goodies in there. Save your lunch money. Welcome in.

[fayettefatts]

I joined this site a year ago when I started casting bullets. It has been my most valuable resource and I am grateful to all here that have helped on my journey. Hope you enjoy your time here.

[Wag]

You'll learn a lot, whether you want to or not.

--Wag--

[Wayne Smith]

Guys, he's been 'casting and loading for a few years' - he's already hooked! This is where you come to get your addiction educated!

[LenH]

Welcome aboard, but you are already down the rabbit hole of casting.
One of the things I learned here is how much I didn't know about casting. I had to change some of the misconceptions I was taught by an old timer
in my youth. Sometime change is good.

[metricmonkeywrench]

Welcome aboard, part of the guidelines of being here is that you need to study, there will be a test on your 30th day and you will need to be able to recall without aid of refence any of the information from:

http://www.lasc.us/articlesfryxell.htm
http://ps-2.kev009.com/ohland/Cast_Bullet/Ideal-Lyman_Molds/Ideal-Lyman_Mold_Descriptions.html

Just Kidding... though these are two most uesful inks you can come by. You just joined the 3rd.....

[waksupi]

Yep, you'll sure save money.

Tee hee!

Haha!

Brahahahaha!!!!!

[gwpercle]

Welcome to the Addiction from Baton Rouge , Louisiana !

Don't look for any "Cure" ... every member here is nothing but an ... Unrepentant Enabler !

Don't be afraid to ask a question ... we are alway's glad to help .
Gary

[super6]

Learn something every time I come here (Every Day) Was sizing my 45 acp boolets to 451 And bumped to 452 as that was considered to be the optimal size by several other casters, The difference was amazing as far as accuracy, Go figure .001 would make that much difference! Welcome aboard!

[lightman]

Welcome Aboard

[WRideout]

Welcome. I would advise you to start a "Mould fund", to help buy all the moulds you didn't know you couldn't live without!!

That goes along with a "new gun fund" for the rifles that you bought a mold, before having anything to shoot it out of.

Welcome. If you add your location to your personal information, someone near by may offer to get together to help, if you need it.

Wayne

[slim1836]

Learn something every time I come here (Every Day) Was sizing my 45 acp boolets to 451 And bumped to 452 as that was considered to be the optimal size by several other casters, The difference was amazing as far as accuracy, Go figure .001 would make that much difference! Welcome aboard!

See, size does matter.

Slim

[Alstep]

Welcome to the madness! A great bunch here. The learning never stops.

[SSGOldfart]

welcome pull up a stump start reading :bigsmyl2:

[Hondolane]

Thanks guys! I do have a sizable mold inventory that I've collected through the years. It's about 167 molds though I would venture a pittance to what others have here. Mostly centered around 45-70, 40-65, 44-40, 38-55. 32-20, 45LC and a smorgsborg of 30 cal to 357 Mag molds. I shoot BP as well in C-Sharps/Shilohs so always looking for a new mold to play with.

[Thin Man]

Welcome to the Asylum.