View Full Version : when to dump paper hulls
I still have a lot of federal maroon/red paper hulls which I reload. My question is: When do you dump the hulls if they show signs of pin-holes along the edge where the paper meets the brass? I see some very, very slight pin holes, can they be repaired? Or is it best to just trash these hulls?
best
atr
la5676
12-02-2022, 11:16 AM
No repairs. If you see pinholes, the paper is getting thin down there. The next thing to happen is hull separation from the base.
HWooldridge
12-02-2022, 11:49 AM
If they get ragged on the end, trim the star crimp and start roll crimping. Pinholes along the brass are not fixable.
pietro
12-02-2022, 12:12 PM
.
Cut the paper free of the shell & convert the brass into dry-firing snap caps by pushing a lead pencil eraser into the empty primer hole.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.