View Full Version : 357 max hunting boolit
tcbnick
11-28-2022, 09:27 PM
So I got the wife a 357 maximum in a encore carbine 16.25 length barrel for hogs and now she shoots more than I do. Jackets are getting $$$ so. Read a lot about accuracy mould like the 180 sil but do they hunt? I need a good hunting mould of about 180gr that is In stock NOE has 1 I like but not in stock. Any help?
P Flados
11-28-2022, 10:32 PM
For hogs, I would lean more to a 200 flat nose. The easy answer is:
https://www.titanreloading.com/product/lee-dc-mold-c358200rf/
Click on the Titan link at the top of the page and Cast Boolits gets some kind of consideration I think.
I had a 10" contender 357 Max barrel that loved the Lee 200.
There is lots of hunting experience out there with this bullet profile (From RCBS, Lee & others) as fired from 35 Rem, 357 Max, 350L. I have never seen a report of "I used the LEE/RCBS 200 and it did not work as well as ....".
GhostHawk
11-28-2022, 10:43 PM
The Lee 200 gr gas checked cast is my most accurate bullet in my .357 mag handi rifle. Not a max but not that much difference.
I load mine in .360DW cases just a thousandth off the riling.
Sighting in the scope I got 3 in one ragged hole @ 50 yards which is good enough for me.
At 100 it will consistantly print groups of 1 inch to 1.25". But that is more about the shooter than the bullet/load/gun.
tcbnick
11-29-2022, 07:10 PM
Thanks guy
And yes 1.25 is good enough for me too
hc18flyer
11-29-2022, 08:31 PM
I have a 180 grain gas check wfn 'Larsen' that Mihec made as a group buy. I think NOE has a similar one? I like to push mine with 26 grains of Accurate 1680. You might check Mihec's sale, going on now. I used the RCBS 35-200 a few years ago on a whitetail, bullet 'pencilled' right thru, found the doe, but shectravelled a long ways. Think I will like the wfn. hc18flyer
tcbnick
11-30-2022, 09:23 PM
That’s what I was afraid of with the RCBS 200. The “Larsen” out of stock at MP, but does anyone have an opinion on his c 360-180rf?
hc18flyer
11-30-2022, 10:11 PM
The MP c360-180rf is very similar to my mold designed by Larsen? hc18flyer
MT Gianni
12-01-2022, 11:01 AM
NOE 180 WFN is another excellent bullet.
NOE 180 WFN is another excellent bullet.
Yes.
MT Gianni
12-02-2022, 02:11 PM
The original bullet Lyman made for the Max was the 358627 a 225 gr swc. It is still a great choice.
http://www.lasc.us/Fryxell_Lyman_358627.pdf
tcbnick
12-06-2022, 06:51 PM
Thanks again. The NOE 180 is what I was really interested in but “ out of stock”
Accurate mold has a 358627 with gc clone but are they still around?
Beerd
12-10-2022, 01:38 PM
Accurate mold has a 358627 with gc clone but are they still around?
have you tried to contact him?
tom@accuratemolds.com
..
MT Gianni. ~. I love that bullet. Cast a bunch of 'em! Great on hogs. Need to expand my experiences and use it on deer.
stubshaft
12-11-2022, 12:42 AM
My favorite Maxi bullet is the SSK 200 grained bullet designed by J. D. Jones. It was accurate enough to win me a couple of Sillywett Championships and dropping a slew of hogs. Always ahead of WW296 powder.
Iowa Fox
12-17-2022, 08:28 PM
I've got 2 - 358627 molds. One is a Lyman and the other is a Lee group buy from this site. l think they are just a tad heavy for the max. I have better luck with some of the 180 grn. molds. I wish I would have ordered a 190 Ranch Dog when he was selling them.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.