View Full Version : Lyman Tru-Lline press ?
ascast
11-19-2022, 01:59 PM
Just wondering if they ever made one with the Large 310 die holes as would be used for the 50-70 for instance. Or adapter bushing for the standard 7/8x14 thread of modern presses. For those who don't know, the 310 dies actually have two sizes. The larger is for 50-70, 348 Winchester, things of that size.
thanks all
Green Frog
11-19-2022, 08:48 PM
We talked about this at length in Vintage Reloading Tools and/or the ARTCA Forum which, unfortunately seems to have been down for the last couple of weeks. The point is, there was such a beast, but it’s about as often seen as Sasquatch.
And just to set the record straight, there was also a smaller diameter Ideal die used for a couple of small diameter cases like the 25-20 SS. AFAIK, they were only used in some of the early tong tools and were all long gone when the TL Jr was developed, so no extra small hole presses.
Froggie
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.