WTT Mould(s) for Mould(s) TC Lyman Lee

[metricmonkeywrench]

WTT- I have some unused molds and a sizer I wish to trade, either all together or in part for a different mould(s) to be an equitable value. Please respond via PM- if a deal is struck I will post it in the ad. This IS NOT a case of the first "I'll Take it" as I am looking for a trade for what I need for me- don't be offended if i don't take the first offer or reply right away. Additional Pix or info available on request.

TC .45 Maxi-Ball- appears to be in nice condition but I have not used it.
Shiloh RB mould marked 454J
Lyman 2 Cav 380 RB mould
Lee 459-500 Mould and associated .458 sizer. Supposedly the bullet of choice for the 458 SOCOM or for use in a 45-70 Govt.
The little single ball mould with 448 and 1967 Cunningham and Mc Atee Savannah Ga engraved on it will be thrown in free for the asking

I am looking for steel (Lyman, Ideal RCBS etc) .30 caliber (double cavity preferred) mould(s) 170g or better.

Figure each party in the trade will cover their shipping costs.

If there are no takers for trades after a few days I may close this out or convert it to a WTT/WTS ad.

306458

[Maven]

The little single ball mould with 488(?) marked on it will be thrown in free for the asking


mmw, I think the brass ball mould in the center is a Jeff Tanner (England) product. It is of especially good quality if it is.

[Good Cheer]

Is that Lee 45 mold the 500 grain GC or plain base?

[Good Cheer]

By the way, on the .30 molds, what bore rider diameter do you need? I have some Lyman molds with different diameters up front on the part that rides on the bore. The #311334 is all the way down to like .295/.296 :roll:

[metricmonkeywrench]

Gentlemen Please be aware this is not a discussion post I will answer direct questions on the items I have listed- any other conversations or offers need to go via PM.

Maven- I corrected the engraved size to 448 in the ad. On the opposite side it is engraved 1967 Cunningham and Mc Atee Savannah Ga

Good Cheer- the Lee 459-500 is a plan based mould.

[Good Cheer]

Gentlemen Please be aware this is not a discussion post I will answer direct questions on the items I have listed- any other conversations or offers need to go via PM.

Maven- I corrected the engraved size to 448 in the ad. On the opposite side it is engraved 1967 Cunningham and Mc Atee Savannah Ga

Good Cheer- the Lee 459-500 is a plan based mould.

The pointy one with deep lube grooves?
https://i.imgur.com/70TrGew.jpg
If so I'd like to get it and the .458 sizer for a muzzleloader.
Do you know the bore rider diameter needed for a .30 mold?

[BrassMagnet]

454J is a Shiloh mould and I hear they use Lyman handles.

[metricmonkeywrench]

Thanks BrassMagnet, updated

[metricmonkeywrench]

Gonna bump this once back to the top, open to cash offers with shipping