32-20 Mold wanted

[gc45]

looking advice on what mold would be best. I have a Win 1892 and a Colt single action, both are 32-20. In looking at several molds from the mold makers and from reading everything I can find, the Lyman 311008 seems to be popular but..some posters say this Lyman mold often drops bullets to small, about .310 from the ones they own. I need .313-.314 so I can size them to my guns. My preference would be a single or double cavity but nothing larger .. Whatever mold I buy I would like it in plain base and also gas check design. Any suggestions?

[Outpost75]

Accurate 31-105T is a double-crimp-groove design for .32 S&W Long, .32 H&R Mag and .32-20, which resembles the shape of factory lead bullets in those calibers. Mine drops .314" diameter. It has a .03 bevel base, but can be ordered with a plain base or in GC. I have not found a GC necessary in .32-20 loads with 10 grains of 4227.

[1Hawkeye]

Try arsenals 311-124 it's a copy of the lyman 311008 but they come out at about .313"

[RickinTN]

If you order your mold from Accurate molds you can pick your diameter and it will be what you specify. I can't imagine a mold being any better than Tom's molds.
Good Luck,
Rick

[gc45]

Thanks guys! I knew someone would have good info.

late edit: after looking at websites suggested, I have ordered the Accurate 31-105T in .314 diameter flat base. This will allow for resizing to several 32-20 revolvers and one 1892 Win. I may at a later date get another with the GC base but will shoot this one first, see how it performs.

[rintinglen]

My 32-98 SWC RCBS has performed well in my Browning 53, Colt Army Special. and M&P S&W. It does all I need done.

[ohiochuck]

Accurate molds ++