View Full Version : SPG Lub
Jim Miller
09-21-2022, 11:31 AM
Thinking of using newly acquired star lubrisizer with SPG lub instead of pan lubing for black powder. Any advice or experience would be welcome.
gmsharps
09-21-2022, 11:46 AM
It works great. SPG is soft enough to not need a heater.
Gmsharps
Greetings,
Interesting side effect using a Star Greaser with soft bullets.
The pressure generated by the Star during lubing stretches the bullet. It becomes longer and smaller in diameter.
The dimensional changes are subtle; but, they are measurable.
It took us a while to isolate this problem.
Cheers,
Dave
Springfield
09-21-2022, 01:57 PM
Seems to me ALL sizers would do that. The lead has to go somewhere when squeezed smaller. I know when I accidentally put a 45 through the 44 sizer die it gets much smaller and longer.
Greetings,
To further clarify, the bullets were sized to a nomimal 0.457". The center of the bullet became 0.456". The front and rear bands measured 0.457".
Cheers,
Dave
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.