View Full Version : New Production Pot IV Pot Liner
deltaenterprizes
09-19-2022, 05:10 PM
The free pot I ER arrived today and the nozzle is stronger and replaceable!
Now to disassemble and replace!
Update! The new liner is slightly different than the old one. I am going to have to make a small part because the stem does not stay engaged with the wire that lifts it
deltaenterprizes
09-19-2022, 09:26 PM
I made a small tab and checked the valve seat and everything looks good for a test tomorrow!
gwpercle
09-21-2022, 02:01 PM
Good Luck ... hope it works !
Gary
Sam Sackett
09-22-2022, 07:10 PM
When I changed my pot out, I needed to also change the rod and bail handle. When Lee changed the pot design, these were also changed.
Sam Sackett
deltaenterprizes
09-22-2022, 09:33 PM
I heated my Lyman pot up and melted some alloy and poured it in the LEE pot to help it get started and everything works fine, no drips!
Sam Sackett
09-23-2022, 09:08 PM
Congrats! Keep it running with good clean lead and it will last a long time. Don’t know how old mine is, but it keeps on going. And going. And going.
Sam Sackett
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.