View Full Version : SW 10mm Anyone?
Got anything to get me started on the 4in? Have brass, powder etc
More interested in the powders people have had success with to weed out stuff to not waste time on
Kosh75287
08-25-2022, 01:22 PM
I don't own a 10mm, and I've only reloaded 100-200(ish) rounds for it, but what I see used the most is Alliant Blue Dot, AA#9, Hodgdon HS-6, Longshot, and Ramshot Silhouette. Except possibly for AA#9, these propellants tend to be widely used in .38 Super, also.
MT Gianni
08-28-2022, 06:08 PM
I have a Glock Model 40 10mm. I first tried a WC820 aka AA9 with powder coated 180 gr bullets. Nothing else I have played with comes close, Power Pistol, 800X, or Silhuette. This is a 6" bbl if that changes things.
Ed_Shot
08-28-2022, 06:21 PM
I load for a Delta Elite and Blackhawk 10MM/40SW using PC'd Lyman 401043, 401638 and 401654 over Red Dot/PROMO, Unique, WSF and 800X and have not been disappointed yet.
sparkyv
08-28-2022, 07:51 PM
Blue Dot is my go to 10mm powder. 2400, AA#9 and Longshot come in second.
Power Pistol and Longshot have been mentioned a couple of times so ill start there. I have much Unique and Promo so out of the 4 im sure ill find something that works well.
Tripplebeards
08-31-2022, 10:18 PM
I loaded up some 180 grain AMEC cast boolits with red hi tec coating a buddy gave me for my Glock 20. He gave me a box of 500 of 10mm and a box of the same in 9mm. I used 5.8 grains of green dot. Did a ladder test up to 6.2 grains but haven’t tried them yet. Drops casings within point blank to 5 feet away and cycles perfectly. No leading to boot. Tried green dot because I picked up a 8 pound canister for basically nothing on a group buy. The only other powder I have is less than a pound of HS6 that I save for the couple of boxes of 180 grain XTPs I just picked up.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.