BHN Test Results

[joeb33050]

Here's a summary:
AVG AVG DOT AVG NO DOT HIGH LOW
John Moulton CabTree 13.5 12.7 14.4 15.0 12.0
Jim Britt CabTree 16.0 14.8 17.2 22.0 14.0
John Robinson LBT 10.3 10.0 10.7 11.0 10.0
Mark Whyte LBT 10.5 9.8 11.2 11.5 9.0
Mike Prudhomme LBT 11.6 11.4 11.8 12.5 10.8
John Alexander LBT 13.4 14.0 12.5
Bill McGraw LBT 15.3 14.7 16.0 19.0 13.0
John Bischoff Lee 12.6 12.2 12.9 13.4 11.0
Dave Goodrich Lee 12.9 13.3 12.5 14.3 12.1
Donald Dye SAECO 10.7 10.7 10.7 10.7 10.7

AVERAGE 12.7 12.2 13.0 14.3 11.5
All the bullets were cast from one lot one pot of wheelweights. The "DOT" bullets came from the front cavity of the mold.
The spreadsheet showing ALL the data is up in FILES on the CBA FORUM, castbulletassoc.org.
I sent out 22 sets of bullets to 21 testers, 11 responded, one guy found his tester out of calibraton. The P.O. lost a lot of bullets.
Thanks to all who voluntered.
joe b.

[Dye]

job33050

Thanks for the test.
Was the wheel weights clip on or a mix of tape and clip. I have 10-15 # of new clip
on weights from three different manfactures and have the four testers used in the test. I will run a test on them and see the how much variation there is.

Be carefull Dye