.375 items: 2 molds, sizer, neck expander

[gunwonk]

Got these as part of a larger deal, but I don't shoot .375, so offered here:


Lyman 375449, 264 gr, 2-cavity, plus correct Lyman #449 top punch, $55 + shipping
RCBS 37-250-FN, 250 gr, 2-cavity, plus correct RCBS #570 top punch, $65 + shipping
RCBS .375" H&I size/lube die, $20 + shipping
RCBS .375" neck expander die, $15 + shipping


The Lyman comes with blocks, top punch, and original grey box, no handles. (These grey boxes are glued together, and don't lend themselves to unfolding and shipping flat, so if you want the box, I'd prefer to pack inside *another* box, and mummy wrap the whole thing into a padded flat rate envelope.) Note cavities in good shape, very little peening of the alignment pin holes, the pins have not been hammered, and all screw heads are in excellent shape. The slotted set screw indicates that this mold has the old 10-36 threads on the sprue plate screw and set screw.
302727302728302729302730302731302732

The RCBS comes with blocks, top punch, no box, no handles, and will fit nicely into an SFRB if disassembled. Note cavities in good shape, little or no peening of the alignment pin holes, and the pins have not been hammered.
302733302734

The .375" H&I size/lube die is small enough to get a free ride in either of the packaging options above.

The .375" neck expander is an older RCBS design, with a 1/4"x28 stem that screws into the die body from the bottom. It does *not* have an M-die type .004" step, just goes directly from .375" into a flaring taper. (FYI, the straight section measures about .3749" on my mic.) This die is also small enough to get a free ride if purchased with anything else above.

Shipping in an SFRB will be $9.45, in a padded flat rate envelope $9.65 -- plus extra insurance, if you wish, LMK and I'll look up the rate -- and if you buy more than 1 item, I can get them all shipped in one padded flat rate envelope.

Any questions, need more pics, etc., please feel free.

Thanks for looking. :)

[Sooner]

I’ll take the sizer snd the 374499

[Tonto]

I’ll take the RCBS mold for a buddy’s 375 Win Encore. Thanks. pm coming

[gunwonk]

Both molds, and the sizer, SPF.

Still available:


RCBS .375" neck expander die, $15 + shipping


FYI, the Lyman M-dies are usually .0015"-.002" under the nominal diameter for their caliber (except for the bump), while the RCBS -- at least this one -- is only .0001"-.0002" under, so they work the brass differently. In case you're looking for an alternative. 8-)

Also, all the parts & pieces are interchangeable within that design group, so if have your own die body, and would like just the expander plug & stem, or even just the plug (i.e., to save on postage), LMK and I'll work with you.

Thanks again, everyone, for your interest. :)

[gunwonk]

RCBS .375" neck expander die SPF -- everything gone.

Thanks again, everyone, for your interest. :)