View Full Version : Removing old lube
mike3132
01-27-2009, 02:12 AM
Ive got some t/c maxi hunters that are 20 years old and they were packed inside a tube. the lube was old and the bullets stuck inside the tube. I boiled them and got the tube off but the lube wont come off. i boiled them 3 times and some of the lube came off but most didn't. i put them in a jar with MEK and shake them and some lube came off but still not all.
What can i use to take off the old lube. I believe its old bore butter. thanks, mike
shotman
01-27-2009, 02:23 AM
it should melt. Heat gun or the oven[if wife aint home] set on several paper towels and heat to about 200 . Bore butter is not a petrolum base so alcohol may work better
cajun shooter
01-27-2009, 07:47 AM
I put about 500 on a pan with paper towels under them. Left them in the oven at 200 for about 45 minutes. All of them cleaned up so that they could be relubed. Oh yes I waited till the wife left to run errands.
Might find an old toaster oven to use, rather then SWMBO's oven...
mike3132
01-27-2009, 03:11 PM
Thanks for the suggestions. Someone else tole me to spray them with oven cleaner.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.