Anyone have experience with Cast Performance dry lube?

[dg31872]

I recently bought a box of 32 cal Cast Performance boolits. I cannot see or feel any lube on the boolits.
Would it be advisable to give them a coat of Ben's Liquid Lube prior to loading?
They will be used in 32 H&R at 900 fps or so.
Anyone out there with experience with them, good or bad?

[popper]

Yup, give a coat of BLL.

[charlie b]

According to advertising you don't need to do anything.

"The special lube process used by Cast Performance produces a clear, dry lube, which is barely noticeable on the bullets. This lube is a better tinning agent than any lube previously used on these cast bullets and produces less leading in the barrel. "

[gwpercle]

According to advertising you don't need to do anything.

"The special lube process used by Cast Performance produces a clear, dry lube, which is barely noticeable on the bullets. This lube is a better tinning agent than any lube previously used on these cast bullets and produces less leading in the barrel. "

My Daddy once told me not to believe everything that I read ... there is no longer such a thing as truth in advertising !
Gary